Set the speed, the spin and the aim. See how air and spin bend the ball on its way to the goal.
Goal
Flight time
–
Speed at the goal
–
Sideways move from spin
–
Height change from spin
–
From above
Your shotSame kick, no spinSame kick, no air
At the goal
The goal is 7.32 m wide and 2.44 m high (8 yards by 8 feet).
From the side
Heights are stretched in this view so you can see the dip.
Try a shot
The kick
The set-up
Simplified physics model
What the model does
Three forces act on the ball in flight: gravity, air drag and the Magnus force. The Magnus force is the push a spinning ball gets from the air. It points sideways for sidespin, down for topspin and up for backspin.
The ball has a mass of 0.424 kg and a diameter of 0.218 m, the ball measured by Goff and Carré (2009). The Laws of the Game allow 410 to 450 g and a circumference of 68 to 70 cm.
The drag coefficient is fixed at 0.25. Goff and Carré measured 0.17 to 0.20 for balls without spin and used 0.27 to 0.30 for spinning balls.
The lift coefficient grows with spin and levels off near 0.3. This is our own smooth fit to the values Goff and Carré measured, which were close to 0.3.
The wall stands 9.15 m (10 yards) from the ball, as Law 13 requires. Each player in the wall is 0.5 m wide. That width is our assumption.
The spin stays the same during the flight. Real balls lose a little spin.
What it leaves out
Wind, rain, altitude and the seams and panels of each ball.
The drag crisis: drag changes sharply at a critical speed, which Asai and colleagues (2007) placed at a Reynolds number of 2.2 to 3.0 × 10⁵ for soccer balls.
The zigzag of a ball with almost no spin. Texier and colleagues (2016) link it to unsteady side forces that a model like this cannot predict.